Infrared Panel Heater Prima P6 – 550W

659,00 lei Regular price 820,00 lei
Tax included. Shipping calculated at checkout.

For rooms of 8-12 sqm* with a height of 2.5 m

DESCRIPTION

The Prima radiant panels have a pleasant design, are compact, take up very little space and can be mounted on the ceiling or on the wall. The front part of the panel is made of white material and the back is insulated. The panel frame has 4 holes specially provided for mounting. Attaching the panel is very simple by fixing it to the ceiling or wall with 4 hollow screws (dowels). The thermostat is mounted on the power cable of the panel or a socket thermostat can be used.

In the case of a correct dimensioning, the average operating time of the panel in a winter day is 7 hours (7 hours out of 24h) to maintain a constant temperature of 22 degrees Celsius.

BENEFITS. Why choose heating with infrared radiant panels?

  1. They have reduced consumption by up to 50% compared to other heating systems. The thermal requirement for a radiantly heated room is up to 70% lower than in the case of convective heating. A radiant heating system heats the air, the walls, the floor and the solid bodies in the room, which in turn will give off the heat to the air in the room. A convective system heats the air in the room and the walls stay cool.

  1. The heating efficiency is 95-98% compared to approx. 60% in the case of heating with radiators. Infrared radiant panels directly transmit the heat produced in the useful space of the room, without losses. In the case of a power plant, the flame heats a pipe (serpentine), the pipe heats the water, the water heats the radiator, the radiator heats the air, the air loses heat to the cold walls - all these passages mean high thermal inefficiency.

  1. Increased comfort. Optimum warmth without the hassle. The desired temperature is set on the thermostat and the panels provide the necessary heat from autumn to spring without any care or intervention. Being individually thermostated, different temperatures can be set in different rooms. The panels do not need maintenance throughout their life.

The wood/pellet boiler must be powered and cleaned. The wood must be dry, broken, bought in advance for the cold season. When the fuel in the boiler runs out (especially in the morning) it gets cold in the room. The gas power plant needs revisions, gas checks, SPARKLING, filter change, etc. There is a risk of flooding, fire, gas leaks, suffocation. Thermal discomfort, all radiators are connected in a circuit with a single thermostat in the whole house.

  1. Thermal balance. The temperature difference between the floor and the ceiling is a maximum of 1-2 degrees C. The walls are warm and there are no cold areas with large temperature differences near them.

 

  1. Safety. There is no risk of flooding, fire, gas leaks, explosion, asphyxiation.

 

  1. Health. Infrared heating improves the symptoms of people with respiratory problems. Infrared radiation improves blood circulation. It does not consume oxygen. They don't produce air currents in the room, which will attract dust. Does not dry the air. Emission of negative ions and nanosilver (in the case of Sunjoy panels) with important therapeutic effects.

 

  1. Long lifespan and extended warranty. Radiant panels have a lifespan of 20-25 years with a 5-10 year warranty depending on the model. Over the entire lifetime, no revisions, consumables, interventions or servicing are required.

 The power plants have a 2-year warranty with a 10-year lifespan. Throughout their life, they need revisions, filters, servicing, gas checks, repairs that generate significant costs in addition to monthly consumption.

  1. Quick installation without permits or project. The panels are installed without the need for approvals, authorizations or a project. The effective duration between the moment you decided to heat the house with radiant panels and their commissioning is a maximum of 2 days. Each panel can be assembled in about an hour by any person with minimal technical skills. Customers who buy panels from our company receive a brochure with pictures and text where all the necessary steps for installation are presented, to which is added a no. phone number where I can request assistance at any time. If you want to leave the fixing of the panels in our care, we also offer the assembly service.

 

  1. They can be used in multiple projects. Infrared radiant panels can be used for heating residential spaces (houses and apartments), hotels, guesthouses, commercial spaces, offices, beauty salons, medical offices, warehouses, industrial spaces, etc.

  1. They are resistant to moisture. Infrared radiant panels are resistant to moisture and accidental splashes. They can be successfully installed in bathrooms or kitchens.

 

ELECTRIC CURRENT CONSUMPTION.

On average, in winter, a properly sized panel on the space to be heated effectively works between 6 and 8 hours out of 24, depending on the outside temperature and the degree of insulation of the room. In fact, the radiant panel does nothing but replace the heat that the house loses, with a maximum possible efficiency of converting electricity into heat.

EXAMPLE: For a set temperature of 23 degrees C, a 950W panel mounted in a room of 18-20 square meters (2.5 m high) with only one cold side* (insulated wall with thermal glass) will have a consumption of approx. 6 KWh/day – approx. 180 KWh/month.

* The ceiling towards the attic / the floor on the ground floor - are considered cold sides even if they are insulated.

CAREFUL! The example above is valid for a thermally insulated room, with a single cold side and neighboring heated rooms. If you put such a panel in a room with neighboring unheated rooms, the panel will be undersized and will not be able to cope because it will be overloaded, heating the other rooms indirectly (through the common walls). In this case, the room losses will be higher and the panel will work for a longer period of time, maybe even non-stop. YOU MUST PUT THE RIGHT PANEL IN EVERY ROOM, otherwise it's like putting a horse to pull 4 carts! If you still want to heat only one room and the rest of the house remain unheated, you must put DOUBLE power panels in this room. To ensure that you choose the right power for the space to be heated, check the recommendations in the table below.



ASSEMBLY

Installing the panels is very simple - anyone can do it - it means fixing the panel with 4 holzscrews (in dowels) on the ceiling and inserting the plug into a socket or connecting it to a current box. The thermostat is placed on the power cable like a classic switch. The panels do not have a thermostat included, the thermostat is purchased separately.

Customers who buy panels from incarciere-perfecta.ro I receive a brochure with pictures and text where all the necessary steps for assembly are presented, to which a number is added. phone number where I can request assistance at any time. If you want to leave the fixing of the panels in our care, we also offer the assembly service.

In order to have maximum efficiency, the panels must be mounted on the ceiling as close as possible to the center of the room. If there is a lighting fixture in the middle of the room, leave a distance of 20-30 cm and mount the panel centered on the left-right sides. It is preferable for the panel to be mounted from the light fixture towards the outer wall with the short side of the panel towards the window. If the panel will be mounted on the wall, the room will heat up, but the panel will work 10-40% more.


REQUIRED POWER CALCULATION TABLE:

Power No. Cool Sides* Heated surface (h=2.5m)
With insulation No Insulation
1 ≤ 12 sqm ≤ 10 sqm
2 ≤ 10 sqm ≤ 8 sqm
1. 550-600W 3 ≤ 8 sqm ≤ 7 sqm
4 ≤ 6 sqm ≤ 6 sqm
1 ≤ 16 sqm ≤ 14 sqm
2 ≤ 14 sqm ≤ 12 sqm
2. 750W 3 ≤ 10 sqm ≤ 8 sqm
4 ≤ 8 sqm ≤ 7 sqm
1 ≤ 22 sqm ≤ 20 sqm
2 ≤ 18 sqm ≤ 15 sqm
3. 950W 3 ≤ 15 sqm ≤ 11 sqm
4 ≤ 12 sqm ≤ 9 sqm

*Cold side= Wall, ceiling, floor facing outside or unheated rooms

    TECHNICAL SPECIFICATIONS

    For rooms of: 6 - 12 sqm*, h=2.5 m
    size 82x77x3 cm
    Weight 5 kg
    Supply voltage 230
    Power 550W
    Power cord length 2 m
    Plug Yes
    Color

    white

    Thermostat included Not
    Yield 95%
    Guarantee 5 years

    Customer Reviews

    Based on 7 reviews
    86%
    (6)
    14%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    M
    Madalina Hoffmann
    Sunt multumita de achizitie

    Am achizitionat panoul pentru a completa sistemul de incalzire deja existent. Incaperea este in jur de 12mp. Rezultatul este cel asteptat. Raportul pret-calitate este in ordine pentru mine. Domnul cu care am vorbit a fost foarte amabil, fiind deschis la gasirea unei solutii pentru situatia mea. Pentru mine, relationarea cu clientul este punctul definitoriu pentru a ma reintoarce cu placere in orice tip de magazin, fie fizic, fie virtual.
    Multumesc frumos pentru ajutor, pentru livrare foarte rapida.

    E
    Elena Terchila
    Foarte mulțumită

    Raport calitate preț foarte bun

    P
    Patricia Matei

    Panou radiant Prima P6 – 550W

    D
    Dumitrescu Aurel
    Multumit

    Buna ziua. Sunt foarte multumit d epanou. In viitorul apropiat dorsc sa mai achizitionez ionca unul pentru o camera de baie. Aici doresc sa opresc caloriferul si sa folosesc doar panoul.
    Datele camerei sunt:
    Lungime:3,70 m
    Lățime: 2,70 m
    Înălțime: 2,10 m
    Suprafață: 10 m patrati
    Volum:21 m cubi
    2 pereti afara, 2 pereti care dau in camere incalzite. Podea de gresie. Pod neincalzite. Deci 4 laturi reci.
    Va rog sa-mi recomandati un panou corespunzator.
    Va multumesc si va doresc o zi frumoasa !

    C
    Costel Gusteritean
    Bun

    Își face treaba